OL 410-200 Precision Lamp Source (200 W)

The OL 410 is a microprocessor-controlled, precision DC lamp source specifically designed to accurately operate tungsten filament lamp standards and calibration sources. The power output range is 200 watts for the OL 410-200

The OL 410-200 is for use with OL Series 220 Standards and OL Series 752-10 Plug-in Standards.

GET A QUOTECompare
SKU: OL 410-200 Category:

Description

The OL 410 is a microprocessor-controlled, precision DC lamp source specifically designed to accurately operate tungsten filament lamp standards and calibration sources. The power output range is 200 watts for the OL 410-200.

Tungsten lamp standards must be operated at their specified calibration current in order to realize the accuracy of the standard. A small error in setting the lamp current can induce a sizeable, wavelength dependent error in the spectral output of the lamp. The OL 410 enables the lamp current to be set to an accuracy of better than ±0.02%, a factor of about 121⁄2 better than most other commercial power supplies, which are typically 0.25%.

In order to eliminate electrical shocking of the lamp due to high initial current surges, a ramp function is used to control the turn-on current rise. Once the instrument is turned on, the current automatically increases at a slow, safe rate until the set current is reached. A fail-safe, shut down circuit protects the lamp standard against any equipment malfunctions.

200 Watts

32 Volts DC

8.00 Amps DC

1.00

0.001

0.02%

10ppm

< 2 ppm/ V

< 25 ppm/ °C

100/ 115/ 200/ 230 VAC, 50/ 60 Hz <br> ** The power input voltage is factory configured on the OL 410-1000

6 / 6 / 3.2 / 3.2 A

15°C to 35°C

10% to 85% <em>(Non-condensing)</em>

14.00" D x 9.38" W x 5.38" H

35.56 cm D x 23.83 cm W x 13.67 cm H

21.5 lbs <em>(9.8 kg)</em>

Banana Jacks

Bulletins

OL 410 Precision Lamp Source

OL 220V 200-W Irradiance Standard (380 – 780 nm)

The OL 220V is a 200-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 220P Irradiance Standard (Photometric)

The OL 220P is a 200-W Photometric Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 220C 200-W Irradiance Standard (250 – 2500 nm)

The OL 220C is a 200-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 220IR 200-W Irradiance Standard (250 – 4500 nm)

The OL 220IR is a 200-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 752-10E Standard of Spectral Irradiance (250 – 800 nm)

The OL 752-10E has a spectral irradiance calibration of 250-800 nm wavelength range. It consists of a compact, 200-W...

OL 752-10U Standard of Spectral Irradiance (Seasoned)

The OL 752-10U Seasoned Spectral Irradiance calibration covers the wavelength range of 250 to 2500 nm. The OL 752-10U...

OL 220D 200-W Irradiance Standard (Total Irradiance)

The OL 220D is a 200-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 245B 45-W Irradiance Standard (750 – 2500 nm)

The OL 245B is a 45-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

OL 752-10L Standard of Spectral Irradiance (250 – 1800 nm)

The OL 752-10L has a spectral irradiance calibration of 250-1800 nm wavelength range. It consists of a compact, 200-W...

OL 220B 200-W Irradiance Standard (750 – 2500 nm)

The OL 220B is a 200-W Irradiance Standard lamp. These lamps have tungsten coiled-coil filaments enclosed in a small...

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that all goods supplied will be of the kind described or in any specification and drawings approved by Optronic Laboratories and will be free from defects in material and workmanship for one (1) year from the date of purchase by the original Purchaser.  During this period, Optronic Laboratories will at its option either repair or replace any goods that are found to be defective in material or workmanship, provided the goods are returned to Optronic Laboratories  in Orlando, Florida, with all shipping, insurance, and delivery charge prepaid (DDU Orlando, Florida).  This Warranty does not extend to batteries, fuses, and glass phototubes (if any), or other items of limited durability, nor does this warranty cover damage to goods caused by leaky or otherwise defective batteries, by Purchaser use of improper batteries and by misuse or abuse, unauthorized alteration, excessive line voltage, excessive temperatures (above 160 degrees F), extreme environmental conditions (such as extremely dusty or wet environment), corrosive atmospheres or servicing by unauthorized personnel.  The items returned shall only be accepted when accompanied by a written statement setting forth the nature and suspected cause of the alleged deficiencies.  After the initial one (1) year warranty, repairs performed by Optronic Laboratories are covered under a limited ninety (90) day warranty. The warranty repaired (and/or replacement) items will be returned DDU to customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OF MERCHANTABILITY) OTHER THAN THE WARRANTY SET FORTH HEREIN.