OL 46D Deuterium Lamp Power Supply

The OL 46D features complex automatic lamp starting and operating supplies. When the supply is turned on, a starting voltage is supplied to heat the filament. After approximately 20 seconds, the initial regulated filament voltage is reduced by 30% and the high voltage circuit is switched on. Following the high voltage pulse striking the lamp arc, a precision DC lamp current is established.

The OL 46D is for use with OL 752-12 Deuterium Standards, OL UV-40 Ultraviolet Standards and OL 440-8-OH UV Integrating Sphere Standard of Spectral Irradiance.

GET A QUOTECompare
SKU: OL 46D Category:

Description

The OL 46D Deuterium Lamp Power Supply is specifically designed to operate the Optronic Laboratories OL UV-40 and OL 752-12 Deuterium Standards of Spectral Irradiance, and the OL 440-8-OH Ultraviolet Integrating Sphere Standard of Spectral Radiance. These deuterium standards must be operated at the same current used during the calibration in order to realize the calibration accuracy. Accordingly, the OL 46D provides a constant lamp current of 300 mA with a ± 0.1% accuracy. It is also an ideal current source for the deuterium lamp used in the OL 740-20 and OL 750-20 Source Attachments.

The OL 46D features complex automatic lamp starting and operating supplies. When the supply is turned on, a starting voltage is supplied to heat the filament. After approximately 20 seconds, the initial regulated filament voltage is reduced by 30% and the high voltage circuit is switched on. Following the high voltage pulse striking the lamp arc, a precision DC lamp current is established. The circuit is designed to provide a stable, reliable discharge without subjecting the lamp to undue stress. An arc status indicator on the front panel indicates operation of the lamp arc, and an elapsed time meter accumulates lamp hours only when the status indicator is lit.

The OL 46D regulated power supply maintains its accuracy during power line transients of ± 10%. The supply will also operate over a ± 10 % load variance, which allows it to accommodate different operating voltages from one lamp to another.

300 mA ±0.1%

10 V <em>(1.2 A)</em>

7 V <em>(1.0 A)</em>

600 volts <em>(Peak)</em>

80 volts ±10%

±0.05%

90 – 265 VAC, 50 / 60 Hz

4 lbs <em>(1.8 kg)</em>

9.88” L x 6.50” D x 3.88” H <em>(25.1 cm x 16.5 cm x 9.9 cm)</em>

Bulletin

OL 46D Deuterium Lamp Power Supply

Bulletin

OL UV-40 UV Irradiance & Radiance Standards

Bulletin

OL 752-10/ -12 Plug-in Standards of Spectral Irradiance

Bulletin

OL 440-8-OH Variable Ultraviolet Integrating Sphere Calibration Standard

Featured

OL 752-12 Standard of Spectral Irradiance (200 – 400 nm)

The OL 752-12 is calibrated for Spectral Irradiance over the wavelength range of 200 to 400 nm It uses...

OL UV-40 Ultraviolet Irradiance Standard (200 – 400 nm)

The OL UV-40 consists of a stable, 30-watt deuterium lamp with an ultraviolet transmitting suprasil window. The OL UV-40 uses...

Featured

OL 752-12U Standard of Spectral Irradiance (Seasoned)

The OL 752-12U Seasoned Lamp for the OL 752-12 Series Standard of Spectral Irradiance is calibrated for spectral irradiance...

OL UV-40U Ultraviolet Irradiance Standard (Seasoned)

Prior to calibration, each lamp is seasoned for 24 hours. Stability tests indicate that after the initial burn-in, the...

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that all goods supplied will be of the kind described or in any specification and drawings approved by Optronic Laboratories and will be free from defects in material and workmanship for one (1) year from the date of purchase by the original Purchaser.  During this period, Optronic Laboratories will at its option either repair or replace any goods that are found to be defective in material or workmanship, provided the goods are returned to Optronic Laboratories  in Orlando, Florida, with all shipping, insurance, and delivery charge prepaid (DDU Orlando, Florida).  This Warranty does not extend to batteries, fuses, and glass phototubes (if any), or other items of limited durability, nor does this warranty cover damage to goods caused by leaky or otherwise defective batteries, by Purchaser use of improper batteries and by misuse or abuse, unauthorized alteration, excessive line voltage, excessive temperatures (above 160 degrees F), extreme environmental conditions (such as extremely dusty or wet environment), corrosive atmospheres or servicing by unauthorized personnel.  The items returned shall only be accepted when accompanied by a written statement setting forth the nature and suspected cause of the alleged deficiencies.  After the initial one (1) year warranty, repairs performed by Optronic Laboratories are covered under a limited ninety (90) day warranty. The warranty repaired (and/or replacement) items will be returned DDU to customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OF MERCHANTABILITY) OTHER THAN THE WARRANTY SET FORTH HEREIN.