OL 730E Programmable Radiometer / Photometer - Optronic Laboratories

OL 730E Programmable Radiometer / Photometer

The OL 730E is a microprocessor-controlled, high sensitivity radiometer/photometer that can be programmed to read directly in any user-specified radiometric or photometric quantity.

$2,900.00

Description

The OL 730E is a microprocessor-controlled, high sensitivity radiometer/photometer that can be programmed to read directly in any user-specified radiometric or photometric quantity. The basic OL 730E is furnished with an internal preamplifier and has a sensitivity of 1 x 10-14 amperes.The optional detectors available for use with the OL 730E include silicon, photomultipliers, germanium, and indium gallium arsenide.

The OL 730E can be programmed by the user to read directly in any specified radiometric optical unit. Up to 25 calibration factors for different detector/filter/input optic configurations can be stored in memory. Once the desired detector/filter/input optic configuration and associated calibration factor are selected, the OL 730E will measure and read directly in the designated optical units. The OL 730E-HV, a programmable, high voltage DC power supply for use with photomultiplier detectors, is also available as an option at time of purchase or as a factory upgrade.

User Programmable

4½ Digits Plus Exponent

2 x 10-10 to 2 x 10-3 Amps

10-14 Amps

10-3 to 10-7 Amps: ± 0.05 % + 1 Digit
10-8 to 10-9 Amps: ± 0.1 % + 1 Digit
10-10 Amps: ±0.5 % + 2 Digits

1.0-14 A/√Hz

Auto, Manual, or Software Selectable

0.1 Sec to 10.0 Sec

5°C to 40°C

0% - 90% (Non-condensing)

7.12” x 3.71” x 7.75”
(18.1 x 9.4 x 19.7 cm)

2.5 lbs. (1.13 kg)

85-265 VAC, 0.3A, 50 / 60Hz

USB

15-pin Female (HD15) TTL
(4 Inputs, 4 Outputs)

-200 VDC to -1100 VDC

Bulletin

OL 730E Programmable Radiometer / Photometer

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that all goods supplied will be of the kind described or in any specification and drawings approved by Optronic Laboratories and will be free from defects in material and workmanship for one (1) year from the date of purchase by the original Purchaser.  During this period, Optronic Laboratories will at its option either repair or replace any goods that are found to be defective in material or workmanship, provided the goods are returned to Optronic Laboratories  in Orlando, Florida, with all shipping, insurance, and delivery charge prepaid (DDU Orlando, Florida).  This Warranty does not extend to batteries, fuses, and glass phototubes (if any), or other items of limited durability, nor does this warranty cover damage to goods caused by leaky or otherwise defective batteries, by Purchaser use of improper batteries and by misuse or abuse, unauthorized alteration, excessive line voltage, excessive temperatures (above 160 degrees F), extreme environmental conditions (such as extremely dusty or wet environment), corrosive atmospheres or servicing by unauthorized personnel.  The items returned shall only be accepted when accompanied by a written statement setting forth the nature and suspected cause of the alleged deficiencies.  After the initial one (1) year warranty, repairs performed by Optronic Laboratories are covered under a limited ninety (90) day warranty. The warranty repaired (and/or replacement) items will be returned DDU to customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OF MERCHANTABILITY) OTHER THAN THE WARRANTY SET FORTH HEREIN.