OL 756-150 Dual Calibration Check Source Module - Optronic Laboratories

OL 756-150 Dual Calibration Check Source Module

The OL 756-150 Calibration Check Source provides a simple yet powerful method for verification of the calibration of the OL 756 spectroradiometer. Two critical parameters necessary for achieving correct measurement results are wavelength and spectral response calibration accuracy.

GET A QUOTE
SKU: OL 756-150 Category:

Description

The OL 756-150 Calibration Check Source provides a simple yet powerful method for verification of the calibration of the OL 756 spectroradiometer. Two critical parameters necessary for achieving correct measurement results are wavelength and spectral response calibration accuracy. The OL 756-150 is a dual purpose check source that provides a means to perform easy verification of both critical parameters, with calibration check routines built into the OL 756 software. The OL 756-150 is a very convenient tool for daily calibration checks in the laboratory and is especially useful for calibration checks when in the field where conditions cannot be fully anticipated.

The dual source contains an ultraviolet Hg-Ar arc lamp source producing multiple emission lines in the UV-visible range and a highly stable 5W tungsten lamp. The source is pre-aligned for easy plug-in, single port operation and is conveniently powered by the OL 756. With the OL 756 software providing tools for simple calibration adjustment, the OL 756-150 greatly enhances the overall performance and portability of the OL 756 system.

Lamp Type: Cold Cathode Hg Vapor / Ar Penning Gas
Lamp Lifetime (Typ.): 5000 Hours
Wavelength Range: 250 nm to 800 nm

Lamp Type: Cold Cathode Hg Vapor / Ar Penning Gas
Lamp Lifetime (Typ.): 5000 Hours
Wavelength Range: 250 nm to 800 nm

5.38” x 3.25” x 2.50”
(13.67 cm x 8.25 cm x 6.35 cm)

1.25 lb. (0.56 kg)

5°C to 40°C

12VDC

Bulletin

OL 756-150 Dual Calibration & Gain Check Source Module

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that all goods supplied will be of the kind described or in any specification and drawings approved by Optronic Laboratories and will be free from defects in material and workmanship for one (1) year from the date of purchase by the original Purchaser.  During this period, Optronic Laboratories will at its option either repair or replace any goods that are found to be defective in material or workmanship, provided the goods are returned to Optronic Laboratories  in Orlando, Florida, with all shipping, insurance, and delivery charge prepaid (DDU Orlando, Florida).  This Warranty does not extend to batteries, fuses, and glass phototubes (if any), or other items of limited durability, nor does this warranty cover damage to goods caused by leaky or otherwise defective batteries, by Purchaser use of improper batteries and by misuse or abuse, unauthorized alteration, excessive line voltage, excessive temperatures (above 160 degrees F), extreme environmental conditions (such as extremely dusty or wet environment), corrosive atmospheres or servicing by unauthorized personnel.  The items returned shall only be accepted when accompanied by a written statement setting forth the nature and suspected cause of the alleged deficiencies.  After the initial one (1) year warranty, repairs performed by Optronic Laboratories are covered under a limited ninety (90) day warranty. The warranty repaired (and/or replacement) items will be returned DDU to customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OF MERCHANTABILITY) OTHER THAN THE WARRANTY SET FORTH HEREIN.