OL IS-670-LED 6-inch Integrating Sphere

The OL IS-670-LED consists of a 6-inch diameter, PTFE coated, high reflectance integrating sphere. It is mounted in a convenient, rugged stand for tabletop or laboratory benchtop use, eliminating the need for mounting rods or fixtures. The sphere has a 90° entrance port to exit port configuration and includes a SMA connector for connection of the auxiliary lamp incorporated into the OL 770-LED High-speed LED Test and Measurement System via an optical fiber.

GET A QUOTE
Category:

Description

The OL IS-670-LED consists of a 6-inch diameter, PTFE coated, high reflectance integrating sphere. It is mounted in a convenient, rugged stand for tabletop or laboratory benchtop use, eliminating the need for mounting rods or fixtures. The sphere has a 90° entrance port to exit port configuration and includes a SMA connector for connection of the auxiliary lamp incorporated into the OL 770-LED High-speed LED Test and Measurement System via an optical fiber.

The OL IS-670-LED yields spectral reflectance properties > 99% in the 300 nm to 1700 nm wavelength range. A coated internal baffle in front of the exit port prevents non-integrated light from exiting the sphere. The exit port of the sphere is coupled to the OL 770-LED via a fiber optic cable. A wide range of off the shelf LED holders are available, as well as custom LED holders for specific device configurations.

The OL IS-670-LED provides an accurate means of measuring the Total Spectral Luminous Flux and Total Radiant Flux of “forward-looking” LEDs. The OL IS-670-LED Integrating Sphere is designed specifically for use with the OL 770-LED to provide accurate measurements of many properties of light emitting diodes, and permits the user to make color measurements in accordance to recommendations by NIST and CIE Publication 127.

1.250” <em>(31.75 mm)</em>

0.750” <em>(19.05 mm)</em>

0.250” <em>(6.35 mm)</em>

> 98% @ 380 – 780 nm

98.87 in<sup>2</sup> <em>(637.94 cm<sup>2</sup>)<em>

Bulletin

OL IS-670-LED Integrating Sphere for LED TLF Measurements

DOWNLOAD

Bulletin

OL 770-LED Test & Measurement System

DOWNLOAD

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects.  Optronic Laboratories warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty.  Defective parts replaced under this warranty shall become the property of Optronic Laboratories. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized Optronic Laboratories representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with Optronic Laboratories’ operating instructions, maintenance instructions and specifications. Utilization of only Optronic Laboratories’ authorized parts and components.  The utilization of a duly authorized representative for all work performed on Optronic Laboratories equipment during the warranty period.  Any variation(s) to the above warranty must be in writing and mutually acceptable by Optronic Laboratories and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser.  Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL Optronic Laboratories BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER. Extended Warranty Plans are also available.