Description
The OL 752-12RP Replacement Lamp for the OL 752-12 Series Standard of Spectral Irradiance is calibrated for spectral irradiance over the wavelength range of 200 to 400 nm It uses a stable, 40-W deuterium lamp. When mounted in the plug-in/pre-aligned housing, the working distance is 10 cm. This short working distance generates considerably higher irradiance levels than that obtained with conventional ultraviolet irradiance standards. The OL 752-12 is calibrated relative to the NIST Ultraviolet Irradiance Standard for the region below 250 nm and to the NIST High-Accuracy Scale of Spectral Irradiance for the 250 to 400 nm region. The NIST Ultraviolet Irradiance Standard has an uncertainty that varies from ± 7.5% at 200 nm to ± 5% at 250 nm. The OL 752-12 has a transfer uncertainty relative to the NIST Scales that varies from ± 3% at 200 nm to ± 1.5% at 400 nm.
1 YEAR STANDARD WARRANTY
Optronic Laboratories warrants that the equipment has been carefully tested, inspected and left the Factory in proper working condition, free of visible defects. Optronic Laboratories warrants the equipment to be free from defects in material and workmanship, under normal use and operation, for a period of one (1) year after the date of initial operation, or demonstration; or eighteen (18) months from the date of shipment from the Factory; or whichever occurs first. The warranty is limited to the free replacement of all-defective parts and free labor during the first year of warranty. Defective parts replaced under this warranty shall become the property of Optronic Laboratories. The above stated Warranty is subject to the following conditions: Equipment being installed within the United States of America, Canada, or sold by authorized Optronic Laboratories representatives or their agents outside the continental United States. The equipment being installed is operated and maintained in accordance with Optronic Laboratories’ operating instructions, maintenance instructions and specifications. Utilization of only Optronic Laboratories’ authorized parts and components. The utilization of a duly authorized representative for all work performed on Optronic Laboratories equipment during the warranty period. Any variation(s) to the above warranty must be in writing and mutually acceptable by Optronic Laboratories and the customer. The warranty shall not apply to damages resulting from errors in installation, nor shall it apply to any equipment, which has been subject to damages, alterations or misuse by the purchaser. Parts of the equipment, which would be generally considered as expendable service items during normal use, such as fuses, lamps, detector shields, etc., are not covered under the warranty. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THIS DESCRIPTION, AND EXPRESSLY NO IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL Optronic Laboratories BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANTICIPATED LOSS OF PROFITS SUFFERED BY THE PURCHASER. Extended Warranty Plans are also available.
