OL 752-10G Standard of Spectral Irradiance (800 – 1600 nm)

The OL 752-10G has a spectral irradiance calibration of 800-1600 nm wavelength range. It consists of a compact, 200-W tungsten-halogen lamp operating at a color temperature of about 3000 K.

The OL 752-10G uses the OL 410-200 Precision Lamp Source

GET A QUOTECompare

Description

The OL 752-10G has a spectral irradiance calibration of 800-1600 nm wavelength range. It consists of a compact, 200-W tungsten-halogen lamp operating at a color temperature of about 3000 K. The short working distance of 13 cm results in irradiance levels significantly higher than that normally obtained with higher wattage standards. The combination of greater precision in optical alignment and higher irradiance levels provides for a more accurate calibration of the spectroradiometer. Calibration of the OL 752-10 is based on the NIST High-Accuracy Scale of Spectral Irradiance. The NIST Scale has a reported uncertainty that varies from ± 2% at 250 nm to ± 1% in the visible. The OL 752-10 has a transfer uncertainty relative to the NIST Scale that varies from ± 1.5% in the ultraviolet to ± 1% in the visible-near infrared.

Tungsten-Halogen <em>(200 W)</em>

6.500 Amps DC

@ 250 nm: 6 x 10<sup>-8</sup>W/cm²nm <br> @ 550 nm: 3 x 10<sup>-5</sup>W/cm²nm <br> @ 1000 nm: 5 x 10<sup>-5</sup>W/cm²nm <br> @ 1600 nm: 3 x 10<sup>-5</sup> W/cm²nm

1 to 1.5%

≤ 0.06%/ hour <br> <em>*High stability option available</em>

Bulletin

OL 752-10/ -12 Plug-in Standards of Spectral Irradiance

Bulletin

OL 410 Precision Lamp Source

OL 410-200 Precision Lamp Source (200 W)

The OL 410 is a microprocessor-controlled, precision DC lamp source specifically designed to accurately operate tungsten filament lamp standards...

1 YEAR STANDARD WARRANTY

Optronic Laboratories warrants that all goods supplied will be of the kind described or in any specification and drawings approved by Optronic Laboratories and will be free from defects in material and workmanship for one (1) year from the date of purchase by the original Purchaser.  During this period, Optronic Laboratories will at its option either repair or replace any goods that are found to be defective in material or workmanship, provided the goods are returned to Optronic Laboratories  in Orlando, Florida, with all shipping, insurance, and delivery charge prepaid (DDU Orlando, Florida).  This Warranty does not extend to batteries, fuses, and glass phototubes (if any), or other items of limited durability, nor does this warranty cover damage to goods caused by leaky or otherwise defective batteries, by Purchaser use of improper batteries and by misuse or abuse, unauthorized alteration, excessive line voltage, excessive temperatures (above 160 degrees F), extreme environmental conditions (such as extremely dusty or wet environment), corrosive atmospheres or servicing by unauthorized personnel.  The items returned shall only be accepted when accompanied by a written statement setting forth the nature and suspected cause of the alleged deficiencies.  After the initial one (1) year warranty, repairs performed by Optronic Laboratories are covered under a limited ninety (90) day warranty. The warranty repaired (and/or replacement) items will be returned DDU to customer. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR IMPLIED WARRANTY OF MERCHANTABILITY) OTHER THAN THE WARRANTY SET FORTH HEREIN.